Logo
 
 
12/25/2024
 
 
 
 
 
Owner: Chicago Burlington & Quincy
Model:BLW 2-8-0Built As:B&MR 3316 (2-8-0)
Serial Number:21762Order No:
Frame Number:Built:1/1903
Notes:D-4, blt as B&MR 3316 re# CB&Q 3191 ret 6/27
Other locos with this serial:  CBQ 3316(2-8-0) BMR 3316(2-8-0)
  Page Controls   View:  Pics Per Page:
B&MR 2-8-0 Class D-4 3316
Title:  B&MR 2-8-0 Class D-4 3316
Description:  Burlington & Missouri River Railroad 2-8-0 Class D-4 3316 at Philadelphia, Pennsylvania sometime in 1903, photograph by Baldwin Locomotive Works, Chuck Zeiler collection. This locomotive was built in 1903 for the Burlington & Missouri River (a subsidiary of the Chicago Burlington & Quincy) as class D-4 number 3316, renumbered in 1904 to CB&Q 3191, retired in June 1927. The B&MR received 2-8-0 class D-4 locomotives from both Baldwin (sub-classed D-4B) and Schenectady (Alco, sub-classed D-4A). A total of 100 D-4's were built, 75 by Alco and 25 by Baldwin, and at the time of their construction, they were the largest and heaviest locomotives on the Burlington system. They employed 12-inch piston steam valves actuated by Stephenson valve gear. The following is from Burlington Route Historical Society's Bulletin #29, edited by Hol Wagner: There were a number of differences between lcomotives of the two builders, chief among them being the slope of the firebox and style and positioning of the domes (the bell and sandbox being transposed on the two builders versions). The two slightly different firebox designs were both examples of the "kinked" or "broken back" arrangement commonly used in the first years of the 20th Century on early wide firebox locomotives (which also employed two separate firing doors on the backhead). In this arrangement, the rear portion of the mud ring was horizontal, while the front portion sloped downward between the last two pairs of drivers. The downward slope was more pronounced on the Schenectady D-4's than on the Baldwins. The slope had the disadvantage of allowing the fire to slide forward on the sloping grates, gathering at the firebox throat under the fire-brick arch - the point of least fire activity - and choking the lower boiler tubes while leaving a hole in the fire at the point of the kink. Consequently, the Baldwin firebox, with its lesser slope (because it began further to the rear) was a more efficient design.
Photo Date:  1/1/1903  Upload Date: 11/29/2010 3:17:00 PM
Location:  Philadelphia, PA
Author:  Baldwin Locomotive Works
Categories:  Roster,Steam
Locomotives:  CBQ 3316(2-8-0) BMR 3316(2-8-0)
Views:  1256   Comments: 0


Site Design ©2001-2020 Tim Huemmer
Photos © respective authors
  Contact: info@rrpicturearchives.net